What does power failure has occurred on a Maytag dryer?

Possible Solutions A PF (Power Failure) error code indicates that a power failure has interrupted the drying cycle. Touch and hold START to restart the dryer cycle or press POWER to clear the display .

How do I troubleshoot my Maytag dryer without power?

Check to make sure a household fuse has not blown or that a circuit breaker has tripped . Electric dryers use two household fuses or circuit breakers. Make sure both fuses are intact and tight, reset the circuit breaker, or replace the fuse if necessary. If the problem continues, call an electrician.

How do I fix error code F22?

To do this, you'll need to turn the valves connected to each end of the boiler's filling loop . This may remove the F22 code and restore your system to normal, but please note that you shouldn't have to do this more than once or twice a year. This whole process should only take a few seconds.

How do I reset my dryer sensor?

Resetting your dryer is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the dryer (usually 1 to 5 minutes at most), and then power it up again . That's it. That's all it takes to reset.

What is error 22 on tumble dryer?

E22 error code in Candy dryers indicate a control board issue . ... Test it with a multimeter for continuity, if it is open circuit, that is brilliant, just replace it and the dryer will be back in business. If it has continuity then I am afraid it is the control board that will need replacement.

How do I reset my Maytag dryer?

To reset a Maytag dryer, turn it off > unplug it from the wall or flip the breaker > wait 60 seconds > restore power & turn the appliance on .

Do dryers have a reset button?

Some dryer models may have a dedicated “Reset” button that allows you to reset the dryer to its factory settings. On an electric dryer, your “Reset” button may be located on the appliance's control panel with the other dryer options.

Why does my dryer turn on but not run?

If your dryer motor turns on but the drum isn't turning, you'll want to check the drive belt . However, some dryers have a switch that turns it off if the belt is broken. Either way, you'll want to replace the drive belt. Incoming power may be the issue if it's an electric dryer that isn't working.

When I press the start button on my dryer, nothing happens.?

If your dryer does not turn on and begin its drying cycle when you press the “Start” button, there may be an issue with one or more of its internal or external parts . To resolve the issue, you may need to have the malfunctioning parts repaired or replaced, or upgrade your appliance to a newer model.

What does F22 mean on my washer?

F22 indicates a front door lock issue . Try to following method to resolve: Select PAUSE/CANCEL twice to cancel the cycle.

How do I reset my Maytag error code?

Press the Pause or Cancel button twice and the Power button once to clear the code.

How do I fix my F22 Whirlpool?

F22 is an easy one to fix! It means that the system has detected a load of washing still inside the machine when it's attempted to do a cleaning cycle, so you have to take it out and you'll be good to go.

How to troubleshoot Maytag dryer error F22 like a pro (2024)

Steven E / Friday June 28, 2024

The F22 error is a common one that shows up on Maytag dryers. It usually indicates a problem with the outlet thermistor (also called the exhaust thermistor) and may be related to restricted airflow.

If you find out that you need any replacement parts for your Maytag dryer while you’re troubleshooting, you can enter your model number at AppliancePartsPros.com to order them. Most orders arrive in just two business days, and we have thousands of free guides to show you how to install your new parts.

Important: The troubleshooting information in this article is based on general service manuals and may not apply to your specific appliance model. While we strive to offer helpful advice for DIY appliance repairs, variations in models and configurations can lead to differences in troubleshooting steps, error codes and part replacements. For the most accurate guidance, we strongly recommend consulting the technical sheet for your specific appliance model.

Contents hide

I How to troubleshoot Maytag dryer error F22 like a pro

I.II Safety tips

I.III How to troubleshoot the F22 error code

I.III.I Step 1: Reset the dryer

I.III.II Step 2: Check the lint filter and exhaust vent

I.III.III Step 3: Inspect and test the outlet thermistor

I.III.IV Step 4: Check the wiring

I.IV More information

I.IV.I Share this entry

What is the F22 error & why would it display on my dryer?

The F22 error code appearing on the user interface of a Maytag dryer usually points to a problem with the outlet thermistor, which monitors the dryer’s exhaust temperature. This error code can occur in both electric and Maytag gas dryer models.

The F22 error can be triggered by several issues within the dryer, including the following:

A faulty outlet thermistor
Blocked airflow
Faulty wiring
Power interruption or failure

Read more: How To Disassemble A Dryer

Safety tips

When working on any appliance, always keep safety first to avoid personal injury or damage to the appliance or its parts. Here are some tips to keep in mind:

Always power off and unplug your appliance or switch off the circuit breaker before you attempt any maintenance or replacement work. This keeps you safe by eliminating any risk of electric shock.
If the appliance has recently been used, give it plenty of time to cool down before working on it.
If you have a gas model, shut off the gas supply to prevent leaks while you work.
Take your time while working to prevent accidents and personal injuries. Rushing is the enemy of precision.
Work in a well-lit area so you can see and access appliance parts.
Keep your workspace free of clutter and other obstacles. Keep children and pets away from the work area.
Never work on internal parts with wet hands. Make sure the work area is completely dry.
Check the user manual to see if there are specific installation or safety instructions related to your appliance or replacement part.
Be gentle when handling or removing parts. Excessive force might damage the appliance or cause personal injury.
Wear insulated work gloves to protect your hands from sharp metal parts and debris.
When working with wires, avoid touching any exposed wires or terminals. If you need to touch a wire, use a non-conductive tool or wear insulating gloves to prevent electrical shock.
Always take photos or make a note of wiring terminals or other connections before disconnecting them to make reassembly easier.
Don’t test live voltage with a multimeter if you’re unfamiliar with how to prevent short-circuiting.

How to troubleshoot the F22 error code

To resolve the F22 error on your Maytag dryer, follow these steps.

Step 1: Reset the dryer

Also known as power cycling, resetting the dryer can help you determine if the F22 is just a glitch or a sign of something more serious happening inside the machine.

Unplug the dryer from the power outlet.
Leave the dryer unplugged for around 2-3 minutes.
Plug the dryer back in and see if the F22 error disappears.

If you’re still seeing the F22 fault code, move on to the next step.

Step 2: Check the lint filter and exhaust vent

An accumulation of lint can block airflow, which can increase the temperature and trigger the F22 error code.

Check the lint filter (also called a lint trap) and clean it. This trap should be cleaned after each drying cycle.
Make sure the vent hose is well connected and not kinked or bent.
Check the exhaust vent for any damage and replace it if needed. Clean the exhaust vent with a brush or use a vacuum cleaner to remove all debris.
Use a long-handled brush to clean the entire length of the vent.

Once you’ve made sure the vent and lint filter are clean, plug the dryer back in and see if the error persists. If it does, continue troubleshooting.

Read more: How to Clean a Dryer Vent

Step 3: Inspect and test the outlet thermistor

Make sure the dryer is unplugged from the power outlet.
Find the outlet thermistor, which is usually found near the blower wheel housing or exhaust duct.
Look over the thermistor for any visible signs of damage or wear such as cracks, frayed wires or discoloration. If you notice any issues, replace the thermistor.
Set a multimeter to resistance mode (Ω) and use the probes to test the thermistor. You’ll need to refer to the manufacturer’s specifications in the user manual or technical sheet, but the thermistor should typically read around 10k Ohms at room temperature.

If the outlet thermistor tests OK, move on to the next step.

Step 4: Check the wiring

Examine all the wiring connections, including those of the control panel and main electronic control board. Look for any loose or broken wires as these can disrupt the flow of electricity and trigger the F22 error code.

If you find any damaged wires, replace them. If you find any loose connections, reseat them so they’re secure.

Once you’ve replaced the wiring or fixed loose connections, plug the dryer back in to see if the error code has disappeared. If it hasn’t, replace the control board as a last resort.

Read more: Tips for Caring for Your Dryer | Clothes Dryer Maintenance

More information

Thank you for reading! We hope this guide helped you get your Maytag dryer working again.

If you have any other appliance repair needs or projects, don’t hesitate to explore our other troubleshooting guides and videos.

If you need replacement parts or some extra help with ordering them, grab your model number and head over to AppliancePartsPros.com, where you can chat with a pro, read our DIY blog and more.

Don’t forget to subscribe to us on YouTube and follow us on Facebook, Twitter and Instagram!

Share on FacebookTweetSave

Steven E

With nearly a decade of experience in providing top-notch customer service regarding appliance parts and repair, Steven enjoys sharing practical advice, troubleshooting tips, and interesting information to help readers stay informed.